KRYPTONITE SS SERIES CENTER LINK AND TIE RODS w/ PISK KIT PACKAGE
Fits; 2001-2010 Chevy/GMC 2500/3500 HD/ Hummer H2
Tie Rod Bodies and Center Link now come Zinc plated under the black powdercoat to decrease corrosion
This insanely strong centerlink has been engineered to maintain all factory alignment specs and steering geometry. Can be used with GM or aftermarket Idler/Pitman arms and PISK support system.
If installing KRYPTONITE series centerlink on a leveled truck you may need to install longer swaybar endlinks depending on how high the torsion bars have been adjusted. We recommend the Kryptonite HD swaybar endlinks. This kit will only work on trucks that keep the center link in the factory position. If your truck has been lifted make sure the lift kit you have is a spindle style kit not a control arm drop. This PISK Support Kit will only fit a factory or Kryptonite Center Link, only in the factory position.
1 x Kryptonite Series Solid Center Link
2 x Kryptonite Series Tie Rods
1 x PISK2008
Size: 1- 5/8 inch Hexagonal
Material: 1144 Stress Proof Carbon Steel.
Finish: Black Powdercoat
1144 Stress Proof Carbon steel
115,000 psi (Min.)
100,000 psi (Min.)
4140-4130 chromoly steel
(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don�t care. If you can break it we will replace it.
All Kryptonite tie rods are pre-greased with Chevron's ultra duty EP2 (Extreme Pressure) grease they should be serviced with this grease at each oil change. Your Kryptonite products must be purchased from an authorized dealer.